Variable ClusterInstanceConst

Type declaration

• Readonlyattributes: {
      occupancy: Attribute<TypeFromPartialBitSchema<{
          occupied: BitFlag;
      }>, any>;
      occupancySensorType: Attribute<OccupancySensing.OccupancySensorType, any>;
      occupancySensorTypeBitmap: Attribute<TypeFromPartialBitSchema<{
          physicalContact: BitFlag;
          pir: BitFlag;
          ultrasonic: BitFlag;
      }>, any>;
      physicalContactOccupiedToUnoccupiedDelay: OptionalWritableAttribute<number, any>;
      physicalContactUnoccupiedToOccupiedDelay: OptionalWritableAttribute<number, any>;
      physicalContactUnoccupiedToOccupiedThreshold: OptionalWritableAttribute<number, any>;
      pirOccupiedToUnoccupiedDelay: OptionalWritableAttribute<number, any>;
      pirUnoccupiedToOccupiedDelay: OptionalWritableAttribute<number, any>;
      pirUnoccupiedToOccupiedThreshold: OptionalWritableAttribute<number, any>;
      ultrasonicOccupiedToUnoccupiedDelay: OptionalWritableAttribute<number, any>;
      ultrasonicUnoccupiedToOccupiedDelay: OptionalWritableAttribute<number, any>;
      ultrasonicUnoccupiedToOccupiedThreshold: OptionalWritableAttribute<number, any>;
  }

  • Readonlyoccupancy: Attribute<TypeFromPartialBitSchema<{
        occupied: BitFlag;
    }>, any>

    This attribute indicates the sensed (processed) status of occupancy.

    See

    MatterSpecification.v13.Cluster § 2.7.5.1

  • ReadonlyoccupancySensorType: Attribute<OccupancySensing.OccupancySensorType, any>

    This attribute specifies the type of the occupancy sensor.

    See

    MatterSpecification.v13.Cluster § 2.7.5.2

  • ReadonlyoccupancySensorTypeBitmap: Attribute<TypeFromPartialBitSchema<{
        physicalContact: BitFlag;
        pir: BitFlag;
        ultrasonic: BitFlag;
    }>, any>

    This attribute specifies the types of the occupancy sensor. Each bit position, if set, indicates the corresponding sensing capability is implemented.

    The value of the OccupancySensorType shall be aligned to the value of the OccupancySensorTypeBitmap attribute as defined below.

    See

    MatterSpecification.v13.Cluster § 2.7.5.3

  • ReadonlyphysicalContactOccupiedToUnoccupiedDelay: OptionalWritableAttribute<number, any>

    This attribute specifies the time delay, in seconds, before the physical contact occupancy sensor changes to its unoccupied state after detecting the unoccupied event.

    See

    MatterSpecification.v13.Cluster § 2.7.5.10

  • ReadonlyphysicalContactUnoccupiedToOccupiedDelay: OptionalWritableAttribute<number, any>

    This attribute specifies the time delay, in seconds, before the physical contact sensor changes to its occupied state after the detection of the occupied event.

    See

    MatterSpecification.v13.Cluster § 2.7.5.11

  • ReadonlyphysicalContactUnoccupiedToOccupiedThreshold: OptionalWritableAttribute<number, any>

    This attribute specifies the number of movement detection events that must occur in the period PhysicalContactUnoccupiedToOccupiedDelay, before the PhysicalContact sensor changes to its occupied state.

    See

    MatterSpecification.v13.Cluster § 2.7.5.12

  • ReadonlypirOccupiedToUnoccupiedDelay: OptionalWritableAttribute<number, any>

    This attribute specifies the time delay, in seconds, before the PIR sensor changes to its unoccupied state after the last detection of movement in the sensed area.

    See

    MatterSpecification.v13.Cluster § 2.7.5.4

  • ReadonlypirUnoccupiedToOccupiedDelay: OptionalWritableAttribute<number, any>

    This attribute specifies the time delay, in seconds, before the PIR sensor changes to its occupied state after the detection of movement in the sensed area.

    See

    MatterSpecification.v13.Cluster § 2.7.5.5

  • ReadonlypirUnoccupiedToOccupiedThreshold: OptionalWritableAttribute<number, any>

    This attribute specifies the number of movement detection events that must occur in the period PIRUnoccupiedToOccupiedDelay, before the PIR sensor changes to its occupied state.

    See

    MatterSpecification.v13.Cluster § 2.7.5.6

  • ReadonlyultrasonicOccupiedToUnoccupiedDelay: OptionalWritableAttribute<number, any>

    This attribute specifies the time delay, in seconds, before the Ultrasonic sensor changes to its unoccupied state after the last detection of movement in the sensed area.

    See

    MatterSpecification.v13.Cluster § 2.7.5.7

  • ReadonlyultrasonicUnoccupiedToOccupiedDelay: OptionalWritableAttribute<number, any>

    This attribute specifies the time delay, in seconds, before the Ultrasonic sensor changes to its occupied state after the detection of movement in the sensed area.

    See

    MatterSpecification.v13.Cluster § 2.7.5.8

  • ReadonlyultrasonicUnoccupiedToOccupiedThreshold: OptionalWritableAttribute<number, any>

    This attribute specifies the number of movement detection events that must occur in the period UltrasonicUnoccupiedToOccupiedDelay, before the Ultrasonic sensor changes to its occupied state.

    See

    MatterSpecification.v13.Cluster § 2.7.5.9

• Readonlyid: 1030

• Readonlyname: "OccupancySensing"

• Readonlyrevision: 4