This feature shall indicate that the device is able to suppress the supported alarm modes, when the user
acknowledges the alarm. This is intended to stop visual and/or audible alarms, when the user has become
aware that the sensor is triggered, but it is no longer desired to have the alarm modes active on the
device, e.g.:
• The triggering cause have been resolved by the user, but the sensor has not yet stopped detecting
the triggering cause.
• The user is not able to address the triggering cause, but is aware of the alarm and
suppress/acknowledge it be addressed at a later point.
Acknowledge of alarms will for the remainder of this cluster be referred to as suppress.
A suppressed alarm is still considered active and will remain so unless it is actively disabled or the
triggering condition is not longer present. The action of suppressing an alarm mode is only applicable
to and is intended to stop the physical alarming, e.g. emitting a sound or blinking a light; it does not
impact alarm reporting in AlarmsActive.
Indicates any faults registered by the device.